)
Remote Microphone for VM-2000-VM-3000
Product code: Remote Microphone for VM-2000/VM-3000
Power Requirement 24 V DC (12-30 V DC), (Supplied from VM-2000/VM-3000 Amplifier or local power suppy.)
Distortion Less than 1%
Frequency Response 100 - 10,000 Hz
Distortion Less than 1%
Signal-to-Noise Ratio More than 60 dB
Audio Output 0 dB*1, 600 Ω, balanced
Microphone Unidirectional electret condenser microphone, gooseneck type.
Speaker Zone Control ...
Power Requirement 24 V DC (12-30 V DC), (Supplied from VM-2000/VM-3000 Amplifier or local power suppy.)
Distortion Less than 1%
Frequency Response 100 - 10,000 Hz
Distortion Less than 1%
Signal-to-Noise Ratio More than 60 dB
Audio Output 0 dB*1, 600 Ω, balanced
Microphone Unidirectional electret condenser microphone, gooseneck type.
Speaker Zone Control Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast
Emergency Broadcast Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch
Voice Announcement Board Control Activation of 5 messages*2
Number of Connectable Units Up to 4
Communication System RS-485
Volume Control Microphone volume control
Connection Cable and Connector Category 5 STP cable, RJ45 connector
Communication Distance 800 m maximum in total
Finish ABS resin
Dimensions 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded)
*1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier.
)
)
)
)